SamsaraLight is a library implementing the radiative balance of the Samsara model. This library was written in 2008 by Benoit Courbaud (IRSTEA Grenoble), Nicolas Dones (INRA Clermont-Ferrand) and François de Coligny (Capsis). In 2012, new features have been added by Benoit Courbaud (IRSTEA Grenoble), Gauthier Ligot (Ulg Belgium), Mathieu Jonard (UCL Belgium) and, of course, François de Coligny (Capsis).

Warning: this documentation is not up to date any more. New key functionnalities have recently been implemented by Mathieu Jonard and his team.

- Implement computation of above canopy radiations without climate data. Some users are only interested in relative values of transmitted light and do not need accurate absolute values.
- Crown reconstruction, see Piboule et al. (2005), AFS
- Verify equation for the share of energy between simulated beams
- Diffuse energy can be computed with UOC (b=0) and SOC (b=2) algorithm. Some studies have however showed that b=1.23 might be more suitable.
- Correction of the computation of potential energy at tree level (see L558 in SLModel)
- correction of the energy associated to the beam with zenithal angle lower than the minimum zenithal angle.

The below figure introduces the structure of SamsaraLight library and its implementation with Quergus. This figure will be (and need to be) updated…

The core of the library is certainly the procedure `processLighting()`

of `SLModel`

class. Prior to its execution, a beamset is created with the `SLBeamSetFactory`

class. It groups together direct and diffuse beams that are traced for each ground cell. Next, for each cell and ray, trees (and part of trees) that could potentially intercept ray are selected. Interceptions with ray are tested solving equation systems (interception between ellipsoid and a line). Intercepted tree parts (crown parts and trunks) are stored and sorted along the ray in `SLInterceptionItem`

object. Then ray energy is decremented using either the turbid medium hypothesis or the porous envelop hypothesis. Intercepted energy (direct, diffuse, total with or without a slope correction) is then stored in each intercepted items (cell, crown parts, trunks, …).
SamsaraLight has only two interfaces that module must implements : `SLLightableTree`

, which makes the connection with the SLTreeLight object, and `SLLightableCell`

for the connection with `SLCellLight`

. Nevertheless modules must instantiate `SLCellLight`

, `SLTreeLight`

, `SLTreePart`

, `SLModel`

and load some settings. Some of the settings can straightly be loaded using the `SLSettingLoader`

while other settings (plot settings like the latitude) must be set within modules.

The settings of samsaraLight are all defined in `SLSettings`

. Radiation details are loaded from a text file, while plot attibutes are set by modules.

`plotLatitude`

: plot latitude in degree`plotLongitude`

: plot longitude in degree`plotSlope`

: height angle of slope in degree (0° is a horizontal plot, 90° is a vertical plot)`plotAspect`

: clock wise angle from the north to an axis parallel to the slope and going downward. It corresponds to the slope azimut looking downward.`northToXAngle_cw`

: clock wise angle (degree) from the north to the x axis. It corresponds to the azimuth measuring looking towards the positive x axis. If the x and y axis are respectively oriented eastward and northward, this angle equals 90°.

Code example from Quergus.QGInventoryLoader :

SLSettings samsaraSettings = model.getSLModel().getSettings(); //... samsaraSettings.setPlotLatitude_deg(p.lattitude); samsaraSettings.setPlotLongitude_deg(p.longitude); samsaraSettings.setNorthToXAngle_cw_deg(90d) ; samsaraSettings.setPlotSlope_deg(p.slope); samsaraSettings.setPlotAspect_deg(p.aspect);

The text file has two main parts. The first part contains keywords and associated values:

turbid_medium = true trunk_interception = false direct_angle_step = 5 height_angle_min = 10 diffuse_angle_step = 15 soc = true GMT = 1 leaf_on_doy = 40 leaf_off_doy = 250

`turbid_medium`

: if true, radiation transfer use the turbid medium hypothesis (Beer's law). If false, radiation interception is computed using the porous envelop hypothesis.`trunk_interception`

: If true, the interception by trunks is enabled. Radiation interception by cell (or regeneration) is reduced when this option is enabled.`direct_angle_step`

: Step angle use to create direct beams in degree if radiations are next given monthly. 15° correspond to a step of one hour. A 5° step should be preferred? This option has no effect if radiations are next given with the hourly format.`height_angle_min`

: the minimum height angle of beams, i.e. the minimum angle between a horizontal plane and the beam.`diffuse_angle_step`

: Step angle use to create diffuse beamset in degree. 15° correspond a step of one hour.`soc`

: If true, the standard overcast sky algorithm is used to create diffuse beams (beams with an elevation angle close to the zenith, have greater energy). If false, the Uniform Overcast Sky algorithm is used.`GMT`

: correction between meridian standard time and the nearest standard meridian time. In France the nearest standard meridian time is the Greenwich time or the universal time. Nevertheless the legal time corresponds to GMT+1 (GMT = 1) during the winter and GMT+2 (GMT=2) during the summer. If GMT=0 then the user must give the local time (corresponding to the nearest standard meridian). The procedure has not been tested for countries other than France and Belgium though! GMT value is used only with hourly radiation records. It is not used with monthly radiation records.`leaf_on_doy`

: day of year corresponding to the beginning of the vegetative period`leaf_off_doy`

: day of year corresponding to the end of the vegetative period

The second part of this file contains a table with global radiations and the ration between diffuse and global energy. These meteorological informations can have two format : namely monthly and hourly format. With the monthly format, the table has three columns : month number, global radiation in MJ/m2 and the diffuse to global ratio. This table must contain 12 lines, i.e. one per month. But only days within the vegetative period and with an energy above 0 will be used in the simulations. For example, this part might be :

#Month Global Diffus/G 1 71.27760 0.5 2 127.8588 0.5 3 312.6255 0.5 4 415.0542 0.5 5 533.9946 0.5 6 421.6902 0.5 7 425.8980 0.5 8 345.9888 0.5 9 302.9040 0.5 10 181.0038 0.5 11 103.2462 0.5 12 64.91820 0.5

Such data can be obtained worldwide on http://www.soda-is.com/eng/services/service_invoke/gui.php?xml_descript=hc1_month.xml&Submit=HC1month!

With the hourly format, the table has five columns : month number, day number, hour, global radiation in MJ/m2 and the diffuse to global ratio. The file must contain records for every hour of one year. But only days within the vegetative period and with an energy above 0 will be used in the simulations. Watch out that every hour must correspond to a unique meridian. On other words, **use only the winter or summer time. Do not use both in the same file!**. For example, the first lines look like :

#Month Day Hour global (MJ/m²) diffus/global 1 1 0 0 0.5 1 1 1 0 0.5 1 1 2 0 0.5 1 1 3 0 0.5 1 1 4 0 0.5 1 1 5 0 0.5 1 1 6 0 0.5 1 1 7 0 0.5 1 1 8 0 0.5 1 1 9 0.0222 0.5 1 1 10 0.0492 0.5 1 1 11 0.0978 0.5 1 1 12 0.1626 0.5 1 1 13 0.2052 0.5 1 1 14 0.2454 0.5 1 1 15 0.1278 0.5 1 1 16 0.033 0.5 1 1 17 0 0.5 1 1 18 0 0.5 1 1 19 0 0.5 1 1 20 0 0.5 1 1 21 0 0.5 1 1 22 0 0.5 1 1 23 0 0.5 1 2 0 0 0.5 1 2 1 0 0.5 1 2 2 0 0.5 1 2 3 0 0.5 1 2 4 0 0.5 1 2 5 0 0.5 1 2 6 0 0.5 1 2 7 0 0.5 1 2 8 0.0042 0.5 ...

For each ground cell, many beams are created and traced from the hemisphere toward the cell. Those beams are grouped together in a set of beams which is created in the beginning of the simulation. Every beam as an azimut, an elevation angle (or height angle) and diffuse or direct energy.

Diffuse rays are created at regular intervals of height angle and azimuth. The intervals is given in the settings : `diffuse_angle_step`

(say DAS). Those two angles vary from DAS/2 to PI/2 and 0 to PI, respectively.

The total diffuse energy (sum (global*Diffus/global)) is distributed between rays according to the standard overcast sky or the uniform overcast sky method.

double energy; double meridianNb = 2 * Math.PI / diffuseAngleStep_rad; double heightAInf = heightAngle_rad - diffuseAngleStep_rad / 2; double sinInf = Math.sin(heightAInf); double heightASup = heightAngle_rad + diffuseAngleStep_rad / 2; double sinSup = Math.sin(heightASup); if (SOC == false) { // Uniform Overcast Sky, per square meter of a // horizontal plan energy = (2 * totalDiffuse / meridianNb) * (sinSup * sinSup - sinInf * sinInf) / 2; } else { // Standard Overcast Sky, Energy per square meter of a // horizontal plan energy = (6 * totalDiffuse / (7 * meridianNb)) * ((Math.pow(sinSup, 2) - Math.pow(sinInf, 2)) / 2 + 2 * (Math.pow(sinSup, 3) - Math.pow(sinInf, 3)) / 3); } // in MJ/m2 on a plane perpendicular to the ray energy = energy / Math.sin(heightAngle_rad);

Later on only rays with height angle greater than the minimum height angle (height_angle_min) and that do not intercept the ground (with sloping plot) are used.

// A beam is created only if it reaches the soil with an angle > // angleMin the cosinus of the angle between the vector // orthogonal to slope and the beam must be higher than // sin(angleMin) this cosinus is given by scalar double scalar = Math.cos(slope_rad) * Math.sin(heightAngle_rad) + Math.sin(slope_rad) * Math.cos(heightAngle_rad) * Math.cos(azimut - bottomAzimut_rad); if (scalar > Math.sin(angleMin_rad)) //...

The computation process differs with the format use in the settings to define the radiations (hourly or monthly format, see in the setting section). Next, similarly to diffuse radiation, only direct beams with height angle greater than the minimum height angle (height_angle_min) and that do not intercept the ground (with sloping plot) are traced.

The hourly radiation procedure has the advantage to avoid calculating how direct energy is shared between rays. Nevertheless, the procedure to compute the sun's position is litle more complicated and less precise.

For each month with direct energy above 0 MJ/m2, beams are created at regular intervals of hour angle according to the `direct_angle_step`

(say BAS, Beam angle step). Their hour angle vary from BAS/2 to PI/2. For each month, simulation is therefore perfomed only for one day. The total direct energy is shared between direct rays according to the sinus of their hour height angle and day height angle.

heightAngle_rad = Math.asin(Math.sin(latitude_rad) * Math.sin(declination_rad[i]) + Math.cos(latitude_rad)* Math.cos(declination_rad[i])* Math.cos(hourAngle)); azimut_rad = sunAzimut(latitude_rad, declination_rad[i],hourAngle, heightAngle_rad, southAzimut_rad); double hourSinHeightAng = Math.sin(latitude_rad)* Math.sin(declination_rad[i])* angleStep_rad + Math.cos(latitude_rad)* Math.cos(declination_rad[i])* (Math.sin(hourAngle + angleStep_rad / 2) - Math.sin(hourAngle - angleStep_rad / 2)); // in MJ/m2 on a horizontal plane energy = directEnergy[i] * hourSinHeightAng/ daySinHeightAng;

Direct rays are created at regular intervals of one hour angle from 00:30 to 23:30. It corresponds to hourly meteorological records. For each month, only one representative day is simulated (see `SLBeamFactory.meanDoyPerMonth()`

). And hourly energy are computed as the sum per hour of every month record (E_h_m = sum_d E_d_h_m, with d, h and m the indices of hour, day and month).

To direct beam, the sun's position need to be computed. It depends on the plot location and the local hour system. In order to take into account the difference between the mean solar time and the apparent solar time, a correction is implemented using en empirical equation of time (daily variation).

Some explanation of the below code :

- eot is the equation of time
- B is an angular transformation of the day number
- If it's 12:00 during the winter (GMT+1, winter time) in Belgium, then the local time corresponding to the nearest meridian (= greenwich meridian for belgium) is 11:00. The local time takes in account that the plot is not exactly on the standard meridian. The local time for a plot at longitude =5° is : meridian time + (5-0)/15 = 11:19:48.
- To compute the local solar time, we add estimates of the equation of time to the local time.

int stdLongitude = (int) (longitude_rad / (Math.PI / 12)); // standard meridian double B = 2 * Math.PI * meanDoy[m] / 365.242; //wikipedia double eot = -7.657 * Math.sin(B) + 9.862 * Math.sin(2*B + 3.599); //minutes, wikipedia double localTime = - GMT + h + 0.5 + (longitude_rad - stdLongitude) / Math.PI*12; //hour double localSolarTime = localTime + eot/60 ; double hourAngle = Math.PI / 12 * (localSolarTime - 12); heightAngle_rad = Math.asin(Math.sin(latitude_rad) * Math.sin(declination_rad[m]) + Math.cos(latitude_rad)* Math.cos(declination_rad[m])* Math.cos(hourAngle)); azimut_rad = sunAzimut(latitude_rad, declination_rad[m],hourAngle, heightAngle_rad, southAzimut_rad);

Two approaches are implemented in SamsaraLight to simulate the transmission of ray light through the canopy, namely the turbid medium and the porous envelop approaches. Only one approach can be used at a time. This is set in the setting file.

The Beer's law is used to predict the transmission of a monochromatic ray through an homogeneous medium. In such medium, the transmission depends on the light travel length inside the medium, the medium density and a coefficient of absorption (http://en.wikipedia.org/wiki/Beer%E2%80%93Lambert_law).

One way to predict light transmission through canopy is to consider it as a turbid medium for which the coefficient of absorption is a function of the leaf area density. Typically :

$ \frac{I}{I_0} = exp(- k.\Omega.LAD.L) $

where k is the coefficient of extinction that depends on the orientation and spatial distribution of leaves and branches. L is the path length within the crown. A clumping factor (omega) might be added to take into account the aggregation of leaves and breanches within crowns. This is implemented is `SLModel`

:

double leafAreaDensity = ((SLCrownPart) treePart).getLeafAreaDensity(); double extinctionCoef = ((SLCrownPart) treePart).getExtinctionCoefficient(); currentEnergy -= interceptedE; double interceptedE = currentEnergy * (1 - Math.exp(-extinctionCoef * clumpingFactor * leafAreaDensity * item.getPathLength()))

As turbid medium model might be difficult to calibrate, we have implemented a porous envelop approach. Crowns can be considered as porous envelop with a fixed transmissivity (I/I0) that does not depends on the light travel distance through the crown. The transmissivity is given by `SLLightableTree`

and is used in `SLModel`

:

double transmissivity = lightableTree.getCrownTransmissivity(); double interceptedE = (1 - transmissivity) * currentEnergy;

Two different crown representations are implemented in SamsaraLight : `SLEllipsoidalCrownPart`

and `SLCrownFraction`

.

The simplest is `SLEllipsoidalCrownPart`

used one ellipsoid or two truncated ellipsoids. Truncated ellipsoids can be characterized with possibly different semi-axes : a, b and c. a, b, and c are respectively the semi-axis in X axis, Y axis, Z axis direction. They are positive. However the two ellispsoids share a common centre (x,y,z). z is typically the height of the maximum extension of crown. x and y are often the tree coordinates but it can be different (ex. With asynmetric crown). The constructor of SLEllipsoidalCrownPart is different for the creation of a single ellipsoid and for truncated ellipsoids. In the latter case, an additional boolean parameter is added to precise whether the crown part is the upper part.

WARNING : all plot orientation and crow radius orientation are not possible. Crown extension must be defined in the directions of the coordinate axes.

The leaf area density and the coefficient of extinction need to be set after the creation of each crown parts if the turbid medium hypothesis is used.

The below code produces crown represented with only one ellipsoids :

double a = (crownRadiusN+crownRadiusS)/2; double b = (crownRadiusE+crownRadiusW)/2; double c = (height - crownBaseHeight) / 2d; double xp = x; double yp = y; double zp = z + crownBaseHeight + c; SLCrownPart p = new SLEllipsoidalCrownPart(xp, yp, zp, a, b, c); //constructor for one ellipsoid p.setLeafAreaDensity(2); p.setExtinctionCoefficient(0.5); crownParts = Collections.singletonList(p);

Here is another and more complex example :

double a = (crownRadiusN+crownRadiusS)/2; double b = (crownRadiusE+crownRadiusW)/2; double c = (height - CrownMaxExtension); double xp = x; double yp = y; double zp = z + crownBaseHeight + c; SLCrownPart p = new SLEllipsoidalCrownPart(xp, yp, zp, a, b, c, true); //constructor for the upper ellipsoid p.setLeafAreaDensity(0.5); p.setExtinctionCoefficient(0.5); crownParts.add(p); //a second and different ellipsoid c = (CrownMaxExtension - crownBaseHeight) ; SLCrownPart p = new SLEllipsoidalCrownPart(xp, yp, zp, a, b, c, false); //constructor for the lower ellipsoid p.setLeafAreaDensity(2); p.setExtinctionCoefficient(0.5); crownParts.add(p);

Another new (Feb 2014) possibility consis in using cylinder to model crowns. In accordance with the other crown parts, the coordinates of the cylindric crown part correspond to the center of the crown (not the base). As previously, the leaf area density and the coefficient of extinction need to be set after the creation of each crown parts if the turbid medium hypothesis is used.

The below code produces crown represented with only one cylinder:

double r = (crownRadiusE+crownRadiusW+crownRadiusN+crownRadiusS)/4d; double l = height - crownBaseHeight; double xp = x; double yp = y; double zp = z + crownBaseHeight + l/2d; p = new SLCylindricalCrownPart(xp, yp, zp, r, l); p.setLeafAreaDensity(this.crownLad); // for turbid medium p.setExtinctionCoefficient(extinctioncoefficient); // for turbid medium crownParts = Collections.singletonList(p);

With `SLCrownFraction`

crowns are divided in 8 parts. Each part has 6 parameters : three for the center coordinates et three semi-axes. The semis axis can be negative or positive depending on the part position within the crown. As previously, the leaf area density and the coefficient of extinction can be defined for every crown part. For example, parts located in the above the center has a vertical semi-axes that is positive. Those located below has a vertical semi-axis that is negative.

double x0 = x; //x, y, z are tree coordinates double y0 = y; double z0 = z + largestCrownExtensionheight; double rup = height - largestCrownExtensionheight; double rdown = largestCrownExtensionheight - CrownBaseHeight; f1 = new SLCrownFraction(x0, y0, z0, reast, rnorth, rup); f2 = new SLCrownFraction(x0, y0, z0, reast, -rsouth, rup); f3 = new SLCrownFraction(x0, y0, z0, -rwest, -rsouth, rup); f4 = new SLCrownFraction(x0, y0, z0, -rwest, rnorth, rup); f5 = new SLCrownFraction(x0, y0, z0, reast, rnorth, -rdown); f6 = new SLCrownFraction(x0, y0, z0, reast, -rsouth, -rdown); f7 = new SLCrownFraction(x0, y0, z0, -rwest, -rsouth, -rdown); f8 = new SLCrownFraction(x0, y0, z0, -rwest, rnorth, -rdown); f1.setLeafAreaDensity(1); f2.setLeafAreaDensity(1); f3.setLeafAreaDensity(1); f4.setLeafAreaDensity(1); f5.setLeafAreaDensity(1); f6.setLeafAreaDensity(1); f7.setLeafAreaDensity(1); f8.setLeafAreaDensity(1); f1.setExtinctionCoefficient(0.5); f2.setExtinctionCoefficient(0.5); f3.setExtinctionCoefficient(0.5); f4.setExtinctionCoefficient(0.5); f5.setExtinctionCoefficient(0.5); f6.setExtinctionCoefficient(0.5); f7.setExtinctionCoefficient(0.5); f8.setExtinctionCoefficient(0.5); crownParts = new ArrayList<SLCrownPart> (); crownParts.add (f1); crownParts.add (f2); crownParts.add (f3); crownParts.add (f4); crownParts.add (f5); crownParts.add (f6); crownParts.add (f7); crownParts.add (f8);

Trunk are considered as cylinder with a a given diameter and height. They do no transmit light.

Similarly to crown parts, trunks need to be created in modules. For example, in Heterofor trunk are created with diameter equals to dbh and with a height equals to crown base height.

trunk = new SLTrunk(x,y,z,dbh,hcb);

Since February 2013, virtual sensors can be added in a scene. They store the intercepted radiation energy (MJ/m²) and, optionally, the corresponding measured value (e.g. irradiance measured with real sensors in the field). They are defined with their coordinates (x,y) and their height above the grid (or the ground).

And here is some results (such results are available in SamsaraLight logs):

SLModel.processLighting() - cell light - SquareCell_[41, 59] PACL = 45.13472 (x 59.03950119018555 y 61.16849899291992) SLModel.processLighting() - cell light - SquareCell_[49, 41] PACL = 30.14904 (x 41.03950119018555 y 53.16849899291992) SLModel.processLighting() - sensor light - ID = 1 height = 0.0 PACL = 45.134721456189325 intercepted items nb 417 (x 59.0395011901855 y 61.16849899291992) SLModel.processLighting() - sensor light - ID = 2 height = 5.0 PACL = 60.06213118628673 intercepted items nb 281 (x 59.0395011901855 y 61.16849899291992) SLModel.processLighting() - sensor light - ID = 3 height = 10.0 PACL = 34.16311483453394 intercepted items nb 346 (x 59.0395011901855 y 61.16849899291992) SLModel.processLighting() - sensor light - ID = 4 height = 15.0 PACL = 17.251482827052445 intercepted items nb 208 (x 59.0395011901855 y 61.16849899291992) SLModel.processLighting() - sensor light - ID = 5 height = 20.0 PACL = 99.99994899098216 intercepted items nb 0 (x 59.0395011901855 y 61.16849899291992) SLModel.processLighting() - sensor light - ID = 6 height = 0.0 PACL = 30.149039881265104 intercepted items nb 526 (x 41.03950119018555 y 53.16849899291992) SLModel.processLighting() - sensor light - ID = 7 height = 5.0 PACL = 16.805923490426867 intercepted items nb 415 (x 41.1 y 53.6) SLModel.processLighting() - sensor light - ID = 8 height = 10.0 PACL = 4.36826718157072 intercepted items nb 529 (x 41.1 y 53.6) SLModel.processLighting() - sensor light - ID = 9 height = 15.0 PACL = 9.444025456719668 intercepted items nb 247 (x 41.1 y 53.6) SLModel.processLighting() - sensor light - ID = 10 height = 20.0 PACL = 25.1333197899623 intercepted items nb 202 (x 41.1 y 53.6) SLModel.processLighting() - sensor light - ID = 11 height = 25.0 PACL = 99.99994899098216 intercepted items nb 0 (x 41.1 y 53.6)

The estimates of intercepted light (by trees or cells) are, without correction, clearly erroneous around plot borders. Incident light is indeed overestimated as the interception by trees located outside of the plot is not taken into account.

Two corrections are implemented in SamsaraLight : (1) limit beam height angle and (2) a torus repetition of the plot.

Diffuse and direct beams with height angle less than the minimum height angle are not created (see `height_angle_min`

in the settings). Rays with low height angle are indeed most of the time fully intercepted by trees located outside of the plot.

In order to avoid overestimation of incident radiation coming from the edges, the plot is repeated in every direction. This system works only if plots are rectangular with a constant slope.

For each traced ray, an optimization procedure has been written to select trees that could potentially intercept the ray. In fact cells are first selected along the horizontal projection of the ray. This creates a rectangular zone with :

- width (R) = maximum crown radius with a correction for cell width and ray azimuth (?)
- length (L) = horizontal projection of (maximum height * 1.25) + R

double Hmax = treeMaxHeight * 1.25; double cRadius = maxCrownRadius; // max crown radius (meters) double lateral = width / Math.sqrt(2) * Math.sin(azt + Math.PI / 4); double R = cRadius + lateral; double L = Hmax / (Math.tan(hAngle) + Math.cos(azimut - bottomAzimut_rad) * Math.tan(slope)) + lateral;

This procedure written in `SLModel.computeRelativeCellNeighbourhoods()`

has to be called in the model class of the modules using SamsaraLight before `SLModel.processLight()`

:

slModel.init(); slModel.computeRelativeCellNeighbourhoods (initStand,treeMaxHeight, cellWidth, maxCrownRadius); slModel.processLighting (initStand);

It is possible to restrict number of cells that will be targeted by rays. Those cells should then be added in the list `celltoEnlight`

of `SLLightableScene`

. If this list is empty (default) then beams will be traced torward every cell of the grid.

This optimization procedure is interesting if users do not want estimate of the energy intercepted by trees or only in a part of the plot (e.g. a buffer zone). This is mainly used to compare observation of ground transmitted light with model estimates (see in `SLModel`

).

By default, SamsaraLight computes the light balance for every targeted cells and loaded virtual sensors. It is possible to avoid simulating the enlightening of the cells and, hence, to enlighten only the virtual sensors. For this purpose, the module needs to set SLSettings.setSensorLightOnly(true).

9 variables are computed at the cell level. They indicate the amount of transmitted energy available on the ground. They differ from the type of energy considered (diffuse, direct, total), the plane on which the energy is projected (horizontal plane, parallel to slope, perpendicular to beam) and whether it is an absolute or relative measure. Energy amount projected on a plane parallel to the slope correspond to what could have been measured with a sensor lying on the ground. In this case, rays perpendicular to the slope bring more energy than vertical rays.

- getDirectEnergy() = amount of direct energy (MJ/m2) projected on a plane parallel to the slope
- getDiffuseEnergy() = amount of diffuse energy (MJ/m2) projected on a plane parallel to the slope
- getTotalEnergy() = amount of direct + diffuse energy (MJ/m2) projected on a plane parallel to the slope
- getRelativeSlopeEnergy() = ratio (%) between total transmitted energy and above canopy energy projected on a plane parallel to the slope
- getRelativeDiffuseSlopeEnergy() = ratio (%) between transmitted diffuse energy and above canopy diffuse energy projected on a plane parallel to the slope
- getRelativeDirectSlopeEnergy() = ratio (%) between transmitted direct energy and above canopy diffuse energy projected on a plane parallel to the slope
- getRelativeHorizontalEnergy() = ration (%) between transmitted total energy projected horizontally and the total above canopy energy projected horizontally (corrected the 10/03/2012)
- getRelativeDiffuseHorizontalEnergy() = ration (%) between transmitted diffuse energy projected horizontally and the diffuse above canopy energy projected horizontally(corrected the 10/03/2012)
- getRelativeDirectHorizontalEnergy() = ration (%) between transmitted direct energy projected horizontally and the direct above canopy energy projected horizontally

double hAngle = beam.getHeightAngle_rad(); double azimut = beam.getAzimut_rad(); // beam energy in MJ/m2 on a plane orthogonal to beam direction double beamEnergy = beam.getInitialEnergy(); // Projection of energy on plane parallel to slope in MJ/m2. double scalar = Math.cos(slope_rad) * Math.sin(hAngle) + Math.sin(slope_rad) * Math.cos(hAngle)* Math.cos(azimut - bottomAzimut); double initEnergy = scalar * beamEnergy; // Projection of energy on a horizontal plane in MJ/m2. (GL - 3 Oct. 2012) double scalarHorizontal = Math.cos(0) * Math.sin(hAngle) + Math.sin(0) * Math.cos(hAngle)* Math.cos(azimut - bottomAzimut); double initEnergyHorizontal = scalarHorizontal * beamEnergy; // From MJ/m2 to MJ. initEnergy = initEnergy * cellSurface; initEnergyHorizontal = initEnergyHorizontal * cellHorizontalSurface; double currentEnergy = initEnergy; double currentHorizontalEnergy = initEnergyHorizontal; //... //loop on every beams and interception //... // Cell energy is in MJ/m2 and projected on a plane parallel to the slope cellTotalEnergy += currentEnergy / cellSurface; cellTotalHorizontalEnergy += currentHorizontalEnergy / cellHorizontalSurface; / if (beam.isDirect()) { cellDirectEnergy += currentEnergy / cellSurface; cellDirectHorizontalEnergy += currentHorizontalEnergy / cellHorizontalSurface; } else { cellDiffuseEnergy += currentEnergy / cellSurface; cellDiffuseHorizontalEnergy += currentHorizontalEnergy / cellHorizontalSurface; } //... //end of loop //... cellLight.setDirectEnergy((float) cellDirectEnergy); cellLight.setDiffuseEnergy((float) cellDiffuseEnergy); cellLight.setTotalEnergy((float) cellTotalEnergy); double relativeSlopeEnergy = 100 * cellTotalEnergy / (beamSet.getSlopeDiffuse() + beamSet.getSlopeDirect()); double relativeSlopeDiffuseEnergy = 100 * cellDiffuseEnergy / beamSet.getSlopeDiffuse(); double relativeSlopeDirectEnergy = 100 * cellDirectEnergy/ beamSet.getSlopeDirect(); //... cellLight.setRelativeSlopeEnergy((float) relativeSlopeEnergy); cellLight.setRelativeDiffuseSlopeEnergy((float) relativeSlopeDiffuseEnergy); cellLight.setRelativeDirectSlopeEnergy((float) relativeSlopeDirectEnergy); double relativeHorizontalEnergy = 100 * cellTotalHorizontalEnergy / (beamSet.getHorizontalDiffuse() + beamSet.getHorizontalDirect()); double relativeHorizontalDiffuseEnergy = 100 * cellDiffuseHorizontalEnergy / beamSet.getHorizontalDiffuse(); double relativeHorizontalDirectEnergy = 100 * cellDirectHorizontalEnergy / beamSet.getHorizontalDirect(); cellLight.setRelativeHorizontalEnergy((float) relativeHorizontalEnergy); cellLight.setRelativeDiffuseHorizontalEnergy((float) relativeHorizontalDiffuseEnergy); cellLight.setRelativeDirectHorizontalEnergy((float) relativeHorizontalDirectEnergy);

- getDirectEnergy() = amount of direct energy (MJ) projected on plane parallel to slope
- getDiffuseEnergy() = amount of direct energy (MJ) projected on plane parallel to slope

//current energy is the projection of energy on plane parallel to slope in MJ. double interceptedE = (1 - transmissivity) * currentEnergy; //porous envelop if (beam.isDirect()) { treePart.addDirectEnergy(interceptedE); } else { treePart.addDiffuseEnergy(interceptedE); }

- getPotentitalenergy() = energy (MJ) that would have been intercepted by the tree part without any neighbouring tree parts. This can be used as an explanatory variable of tree growth.

$ x = L cos \beta cos \alpha $

$ y = L cos \beta sin \alpha $

$ z = L sin \beta $

Mixing this parametric equation of a beam with the equation of a crown part (or a trunk) lead to a quadratic equation that looks like : $AL^2+BL+C=0$. This equation can have 0, 1 or 2 solutions.

The trunks are cylinder with center at ($x_0$, $y_0$, $z_0$) and with a radius $r$:

$ (x - x_0)^2 + (y - y_0)^2 = r^2 $

$ x^2 + x_0^2 - 2xx_0 + y^2 + y_0^2 - 2yy_0 - r^2 = 0 $

The interception points are therefore computed solving the quadric following equation :

$L^2 cos^2 \beta cos^2 \alpha + x_0^2 - 2 L cos \beta cos \alpha x_0 + L^2 cos^2 \beta sin^2 \alpha + y_0^2 - 2 L cos \beta sin \alpha y _0 - r^2 = 0 $

$ A = cos^2 \beta $

$ B = - 2 cos \beta cos \alpha x_0 - 2 cos \beta sin \alpha y _0$

$ C = x_0^2 + y_0^2 - r^2 $

$\frac{(x-x_0)^2}{a^2} + \frac{(y-y_0)^2}{b^2} + \frac{(z-z_0)^2}{c^2} = 1$

The interception equation is :

$ A = \frac{cos^2 \beta cos^2 \alpha}{a^2} + \frac{cos^2 \beta sin^2 \alpha}{b^2} + \frac{sin^2 \beta}{c^2} $

$ B = \frac{- 2 cos \beta cos \alpha x_0}{a^2} + \frac{- 2 cos \beta sin \alpha y_0}{b^2} + \frac{-2 sin \beta z_0}{c^2} $

$ C = \frac{x_0^2}{a^2} + \frac{y_0^2}{b^2} + \frac{z_0^2}{c^2} - 1 $

$(x-x_0)^2 + (y-y_0)^2 = r^2$

Similarly to the interception with trunks, the interception equation is :

$ A = cos^2 \beta $

$ B = - 2 cos \beta cos \alpha x_0 + - 2 cos \beta sin \alpha y_0 $

$ C = x_0^2 + y_0^2 - r^2 $

This algorithm has been updated in February 2013. It is now more general and allow the computation of the radiative balance and height greater than 0 (See figure below). This algorithm computes first all potential point of intersection between the beam, the tree part limits and the ground plane. Next, itercepted items need to have the two roots that respect all the conditions.

source : http://www.powerfromthesun.net/Book/chapter03/chapter03.html

**Sun's declination**: The declination of the Sun is the angle between the rays of the Sun and the plane of the Earth's equator. Because earth axial tilt is nearly constant, solar declination varies with the seasons and its period is one year.**Sun's hour angle**: The hour angle is the angular displacement of the sun east or west of the local meridian due to rotation of the earth on its axis at 15° per hour with morning being negative and afternoon being positive.**Sun's day angle**:

daySinHeightAng = Math.sin(latitude_rad)* Math.sin(declination_rad[i])* (sunSetHourAng - sunRiseHourAng) + Math.cos(latitude_rad) * Math.cos(declination_rad[i]) * (Math.sin(sunSetHourAng) -Math.sin(sunRiseHourAng));

- B. Courbaud, F. de Coligny and T. Cordonnier, 2003. Simulating radiation distribution in a heterogeneous Norway spruce forest on a slope,
*Agri. For. Meteor.*, 116 (1–2), 1-18. - Ligot, G., Balandier, P., Courbaud, B., Claessens, H., 2014. Forest radiative transfer models: which approach for which application?
*Can. J. For. Res.*44:385-397. http://hdl.handle.net/2268/163600 - Ligot, G., Balandier, P., Coubraud, B., Jonard, M., Kneeshaw, D., Claessens, H, 2014. Managing understory light to maintain a mixture of species with different shade tolerance.
*For. Ecol. Manage.*327:189-200. http://hdl.handle.net/2268/163600

help_en/samsaralight.txt · Last modified: 2021/03/08 10:03 by ligot.g

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 3.0 Unported